Flipahjól & Slípiflóka

Flókakefli POLINOX PNL frá PFERD
Þvermál: 100 mm
Breidd: 100 mm
Gatstærð: 19 mn
Gerð: A100

POLINOX non-woven grinding drum PNL dia. 100 x 100 mm keyway 19 mm A100 for fine grinding and finishing.

Flókakefli POLINOX PNL frá PFERD
Þvermál: 100 mm
Breidd: 100 mm
Gatstærð: 19 mn
Gerð: A180

POLINOX non-woven grinding drum PNL dia. 100 x 100 mm keyway 19 mm A100 for fine grinding and finishing.

Flókaskífa PVKR A100G 125mm frá PFERD
Þvermál: 125 mm
Gerð: A100G

POLIVLIES self-adhesive disc PVKR aluminium oxide dia. 125 mm A100G for fine grinding and finishing with an angle grinder.

POLIVLIES self-adhesive disc and the associated POLIVLIES self-adhesive disc holder also enables use on contours. The pre-punched holes mean that they can be ideally centred on and used with various backing pads.

They are especially well-suited to work on large stainless steel (INOX) surfaces.

Flókaskífa PVKR A180M 125mm frá PFERD
Þvermál: 125 mm
Gerð: A180M

POLIVLIES self-adhesive disc PVKR aluminium oxide dia. 125 mm A180M for fine grinding and finishing with an angle grinder.

POLIVLIES self-adhesive disc and the associated POLIVLIES self-adhesive disc holder also enables use on contours. The pre-punched holes mean that they can be ideally centred on and used with various backing pads.

They are especially well-suited to work on large stainless steel (INOX) surfaces.

POLIVLIES grit size 180 M = medium (red-brown)

Flókaskífa PVKR A240F 125mm frá PFERD
Þvermál: 125 mm
Gerð: A240F

POLIVLIES self-adhesive disc PVKR aluminum oxide dia. 125 mm A240F for fine grinding and finishing with an angle grinder.

POLIVLIES self-adhesive disc and the associated POLIVLIES self-adhesive disc holder also enables use on contours. The pre-punched holes mean that they can be ideally centred on and used with various backing pads.

They are especially well-suited to work on large stainless steel (INOX) surfaces.

POLIVLIES grit size 240 F = fine (blue)

Hreinsihjól frá PFERD með hraðlás
Gerð: CD/CDR
Þvermál: 5 mm

For coarse cleaning work, such as removing paint, scale, heat discolouration, rust and adhesive residues in face-down grinding.
The CD clamping system has a threaded connection with female thread (metal/plastic) on the tool side. Also suitable for the following commonly used systems: PSG, Power Lock Type II "turn on", SocAtt, Turn-On

Skrúfur fyrir ALUMASTER frá PFERD
Hentar fyrir: ALUMASTER R 50 / 115 / 125 og F115 / 125
Magn: 5 stk.

Fastening screws for ALUMASTER R 50/115/125, F115/125 and EDGE FINISH system for work on edges

Bolt set for PFERD cutting inserts.